說到正壓出風口，很多人都有一定的了解。下面就讓濟南通風管道加工講解一個問題，正壓送風口在什么原因下，需要停止工作呢？
When it comes to positive pressure outlet, many people have a certain understanding. Now let ji 'nan ventilation pipe processing to explain a problem. Under what reason does the positive pressure air supply port need to stop working?
濟南通風管道加工的正壓送風口通常組裝在高層住宅或?qū)W校的樓梯和避難所，發生事故時，正壓出風口內的電機將進行通風換氣。
The positive pressure air supply outlet of Jinan ventilation pipeline processing is usually assembled in the stairs and shelters of high-rise residences or schools. When a safety accident occurs, the motor in the positive pressure air outlet will be ventilated.
當嘴巴張開時，內部溫度傳感器會提示警報，頂部的宣禮塔會自動打開，可以大力進行排氣操作。在排風過程中，如果保證工作溫度280度，正壓送風口會熔斷隔離開關？？，立即阻斷氣流進入，有效防止火勢蔓延新發展趨勢。
When the mouth is opened, an internal temperature sensor prompts an alarm, and the minaret at the top opens automatically, allowing for vigorous exhaust operation. In the exhaust process, if the working temperature is 280 degrees, the positive pressure air supply port will fuse the isolation switch. , immediately block air flow to effectively prevent the fire from spreading to the new development trend.
如果正壓出風口運行過程中出現一些異常情況，比如電機溫度過高，出現異響，一切都不能正常使用。大家應關閉電源，停止操作，并立即檢查操作，切記不要再次使用。在維修過程中，不得立即使用，需要經過技術人員測試應用后才能再次使用。
If there are some abnormal conditions in the operation process of the positive pressure outlet, such as the motor temperature is too high, abnormal sound, everything can not be used normally. Everyone should turn off the power, stop the operation, and immediately check the operation, remember not to use again. In the maintenance process, not immediately used, need to be tested by technical personnel after the application can be used again.
濟南通風管道加工正壓出風口正常運行過程中，要保證供配電系統充足，工作標準電壓在相對穩定的條件下運行。不建議使用臨時路線，以免造成損失和重大事故。
In the normal operation of the positive pressure outlet of ji 'nan ventilation pipeline processing, it is necessary to ensure that the power supply and distribution system is sufficient and the working standard voltage runs under relatively stable conditions. Temporary routes are not recommended to avoid losses and major safety incidents.
當臨時電路損壞或隔離時，需要立即斷開開關電源電路，停止使用，用技術配置電路，然后進行操作。使用前請務必閱讀相關技術知識，出現緊急問題可立即解決。
When the temporary circuit is damaged or isolated, it is necessary to immediately disconnect the switching power supply circuit, stop using it, configure the circuit with professional technology, and then operate it. Be sure to read the relevant technical knowledge before use. If any emergency problem occurs, it can be solved immediately.
濟南通風管道加工之正壓送風口問題就講到這里了，如果您對此有什么一問的話，那就讓通過網站
www.olzr.cn來聯系我們吧。
So much for the positive pressure air supply port of Jinan ventilation pipeline processing. If you have any questions about this, let us contact us through the website www.olzr.cn.
上一篇：濟南廚房排煙排不干凈是怎么回事？
下一篇：油煙凈化器不能正常凈化油煙怎么辦？
